[lug] free to good home...

[Kevin Fenzi]

I realized that I had been cleaning around two items in my house for
quite a while, and hadn't been using them. So, free to a good (local)
home: 

- ncd 19 xterm (black and white). Takes it a while to warm up, but
  once it does it works fine. (as long as you want a black and white
  terminal). I have the Xncd19 boot file (it boots via tftp from a
  linux/unix box). Last time I powered it up it was working. ;)
  You will need to supply your own mouse (it has a keyboard). 

- Sparc ELC. This is the black and white all in one unit. From the
  sparc faq: 

    SPARCstation ELC (4/25)
        Processor(s):   Fujitsu MB86903 or Weitek W8701 @ 33MHz, FPU on
                        CPU chip, Sun-4c MMU, 8 hardware contexts,
                        21 MIPS, 3 MFLOPS, 18.2 SPECint92, 17.9
                        SPECfp92, 432 SPECintRate92, 425 SPECfpRate92 
        CPU:            501-1861 (1730?) 
        Chassis type:   monitor
        Bus:            none 
        Memory:         64M physical; 64K write-through cache,
                        direct-mapped, virtually indexed, virtually
                        tagged, 32-byte lines
        Architecture:   sun4c
        Notes:          Code name "Node Warrior". 4M or 16M x 33 72-pin
                        SIMMs. No fan. 17" mono monitor built in. first
                        supported in SunOS 4.1.1c.

  sparc linux should work on it, but it's really slow, black and
  white, and has no HD. I was net booting it from a intel linux
  box. It also took a while to warm up, but once it did the screen was
  very nice looking. Has mouse/mousepad/keyboard, no HD. 

Anyhow, if anyone local wants these, blast me an email...

kevin