[lug] Install Problems

Atkinson, Chip CAtkinson at Circadence.com
Tue Dec 5 11:32:39 MST 2000


I think that the two problems that I had were bad disks and filling up
partitions.  The bad disks were because I was rummaging through my old disk
box and one of them was bad.  The other problem was the partitions filling
up.  This sucked too because the machine was a 486 and it took forever to go
through and select all the packages, etc.  I also was trying to install too
much on a smaller disk.  Finally I got the mess working.

Chip

> -----Original Message-----
> From: Shannon Johnston [mailto:nunar at iws.net]
> Sent: Tuesday, December 05, 2000 11:42 AM
> To: 'lug at lug.boulder.co.us'
> Subject: RE: [lug] Install Problems
> 
> 
> Yes, that's exactly what it looks like. 
> I'll have to try a few remedies when I get home.
> 
> Thanks,
> Shannon
> 
> On Tue, 5 Dec 2000, Atkinson, Chip wrote:
> 
> > How does it quit?  Do you get what looks like a crash and 
> then sort of a
> > stair step across the screen saying something like sending 
> termination
> > signals?  If so, there are two causes that I've seen.  The 
> first is that you
> > may be running out of disk space and the second is that you may have
> > hardware problems.  You can run out of disk space by 
> filling up a partition
> > that's too small as well as just filling up the disk.
> > 
> > Chip
> > 
> > > -----Original Message-----
> > > From: Shannon Johnston [mailto:nunar at iws.net]
> > > Sent: Tuesday, December 05, 2000 10:04 AM
> > > To: lug at lug.boulder.co.us
> > > Subject: [lug] Install Problems
> > > 
> > > 
> > > I'm attempting to install RH 6.2 on a HP Vectra VE 4/66. 
> > > It's a small machine that's going to serve as a router for a 
> > > cable modem.
> > > Every time the install gets to where it's copying files, it 
> > > unexpectedly
> > > quits and I have to start over. Has anybody had any 
> > > experience with this?
> > > 
> > > System:
> > >  HP Vectra VE 4/66
> > >  486 processor
> > >  407 MB HD
> > >  16MB RAM
> > > 
> > > Attempting to load RedHat 6.2 - necessary components only
> > >  Installation size - 127 MB
> > > 
> > > 
> > > 
> > >  - Shannon Johnston
> > > 
> > > 
> > > _______________________________________________
> > > Web Page:  http://lug.boulder.co.us
> > > Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> > > 
> > 
> > _______________________________________________
> > Web Page:  http://lug.boulder.co.us
> > Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> > 
> 
> 
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> 




More information about the LUG mailing list