[lug] problems manually configuring IP...

Thu Apr 12 11:55:23 MDT 2001

Here you go...

> Send the output of:

> netstat -r
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt
Iface
10.0.0.0        *               255.255.255.0   U         0 0          0
eth0
default         10.0.0.250      0.0.0.0         UG        0 0          0
eth0

> ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:20:AF:D8:AF:C3
          inet addr:10.0.0.47  Bcast:10.255.255.255  Mask:255.255.255.0
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:72 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          Interrupt:10 Base address:0x300

> arp -a
? (10.0.0.250) at <incomplete> on eth0

> Am I missing anything?
There is one other thing that _might_ shed some light.  I've noticed that on
startup I get some errors from depmod about unresolved symbols.  It looks
like they are all modules that I'm not using with the newer kernel I
compiled.  Is there a log where these messages are preserved?

Brian

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com