UPDATE: [lug] problems manually configuring IP...

J. Wayde Allen wallen at lug.boulder.co.us
Thu Apr 12 15:13:55 MDT 2001


On Thu, 12 Apr 2001, celttechie (Brian Jarrett) wrote:

> These are the last lines in dmesg:
> 
> eth0: 3c509 at 0x300 tag 1, 10baseT port, address  00 20 af d8 af c3, IRQ
> 10.
> 3c509.c:1.16 (2.2) 2/3/98 becker at cesdis.gsfc.nasa.gov.
> eth0: Setting Rx mode to 1 addresses.
> 
> So it is using the right port...  

Depends on what you are plugged into?  It thinks it is talking on the
10baseT port.

> I wonder if "Setting Rx mode to 1 addresses" means anything.

Mine says that too, so I don't think that is causing your troubles.

- Wayde
  (wallen at lug.boulder.co.us)




More information about the LUG mailing list