[lug] cdrecord

[George Sexton]

I'm having some trouble using CDRecord on a RH 9 box. The machine is a
dual PIII 500 w/ 1024MB of RAM and a built-in Adaptect 2940 UW SCSI
controller. The CD Drive is a Yamaha CRW4416S that I have had for
several years. The issue seems intermittent. I ran the job on Wednesday
night, and it worked, but on Friday AM it failed. Does anyone have any
insights?


+ cdrecord dev=0,5,0 /var/tmp/2374.iso
scsidev: '0,5,0'
scsibus: 0 target: 5 lun: 0
Linux sg driver version: 3.1.24
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
Using libscg version 'schily-0.7'
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : SYNC 
Vendor_info    : 'YAMAHA  '
Identifikation : 'CRW4416S        '
Revision       : '1.0g'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC SWABAUDIO 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write in 9 seconds.   0 seconds.
Operation starts.cdrecord: Input/output error. write_g1: scsi sendcmd:
no error
CDB:  2A 00 00 03 C4 A2 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x00 (logical block address out of range) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 4.358s timeout 40s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00

write track data: error after 505745408 bytes

George Sexton
MH Software, Inc.
Voice: 303 438 9585
http://www.mhsoftware.com