[lug] Modutils?

socket at pop.peakpeak.com socket at pop.peakpeak.com
Tue Jun 4 12:17:20 MDT 2013


Hi, everyone. I'm trying to help a relative of mine set up a network
between two Mandrake 6.5 systems.  The problem I've got is with the network 
device module, via-rhine, for a D-Link DFE-530Tx on IRQ 3, IO 0x1000

#modprobe via-rhine
via_rhine.o: init_module: Device or resource busy
#modprobe via-rhine io=0x1000
invalid parameter io

Trying to set io or irq either on the command line or in conf.modules
is only seen as an invalid parameter.

lspci shows:
00:00.0 Host bridge: Advanced Micro Devices [AMD]: Unknown device 7006 (rev 23)
00:01.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 7007 (rev 01)
00:03.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
00:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 8139 (rev 10)
00:07.0 ISA bridge: VIA Technologies, Inc.: Unknown device 0686 (rev 14)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 06)
00:07.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 06)
00:07.4 ISA bridge: VIA Technologies, Inc.: Unknown device 3057 (rev 10)
00:09.0 Communication controller: CONEXANT: Unknown device 1033 (rev 08)
00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB12LV23 OHCI Compliant IEEE-
1394 Controller
01:05.0 VGA compatible controller: Nvidia Corporation: Unknown device 0100 (rev 
10)

cat /proc/pci:
PCI devices found:
..
Bus  0, device   6, function  0:
    Ethernet controller: Realtek 8139 (rev 16).
      Medium devsel.  Fast back-to-back capable.  IRQ 3.  Master Capable.  
Latency=64.  Min Gnt=32.Max Lat=64.
      I/O at 0x1000 [0x1001].
      Non-prefetchable 32 bit memory at 0xe0014800 [0xe0014800].
..

I'm quite sure of the fact that this isn't a conflict of IRQs or IO space in 
either Windows or Linux.  I've been banging my head against this wall for a 
couple hours, and this seems intuitively a 30-second problem.  I'm feeling 
rather stupid. Can someone give us a hand?

Thanks.

--
Chris Riddoch - socket at peakpeak.com


-------------------------------------------------------------
     This message was sent from Peak to Peak Internet.       
 DSL - V.90 modems - Web Hosting and Business connectivity   
          Please visit!  http://www.peakpeak.com             
                     888-600-PEAK                            
-------------------------------------------------------------






More information about the LUG mailing list