[lug] Locking up during compile

Chris M chrism at peakpeak.com
Fri Oct 15 18:11:12 MDT 1999


>My experience and from what I've seen on this list indicate some hardware
>problems.  If the L2 cache disabling doesn't work, start swapping out
>memory, etc.
>
>Chip

Well, I'd not swap memory just yet.

First step should be to introduce more wait states to see if memory 
speed is the issue.  BIOS will allow you to do this usually.

But on the Cyrix processors, make sure that you have a "friendly" 
version of gcc.  I've seen versions of gcc that would SEGV or signal 
11 incorrectly, but backing up to an earlier rev worked fine. But if 
it happens on both processors try the wait states.

On AMD chips it's yet another problem sometimes :)

Chris
Peak to Peak Internet
http://www.peakpeak.com

>
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Chip Atkinson
> http://www.pupman.com
> --- If I can't fix it, I can fix it so it can't be fixed --
>=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
>On Fri, 15 Oct 1999, Howell, Jeff S wrote:
>
> > Try diabling the L2 cache? I had a problem like that once and that cured it
> > <Blah!>
> >
> > -----Original Message-----
> > From: Justin [mailto:glowecon at netscape.net]
> > Sent: Friday, October 15, 1999 9:11 AM
> > To: Linux user group none
> > Subject: [lug] Locking up during compile
> >
> >
> > This is kind of related to my last post about compile problems. I don't
> > think
> > I mentioned that while running ./configure the box would lock up nearly
> > everytime. I pulled the error's from the config.log. Anyhow, the locking up
> > seemed to be because of my Intel 233mmx processor, I swapped it w/ my
> > Cyrix166
> > (blah) and I was able to run ./configure and make, etc numerous 
>times w/ out
> > locking up. So, I am still running into problems while performing 
>"make", it
> > keeps giving me "Error 1" or "Internal compiler errors" but always in a
> > different part of the <compilation> process. I've tried taking out my old
> > edo
> > memory to elimate that hardware but w/ no luck. I'm not sure what is going
> > on
> > and I still can't compile anything. Any help?
> >
> > BTW: This again is my fresh RH 6.1 install and I am trying to compile
> > Windowmaker 0.61.1.
> >
> >                             Justin
> >
> > ____________________________________________________________________
> > Get your own FREE, personal Netscape WebMail account today at
> > http://webmail.netscape.com.
> >
> > _______________________________________________
> > Web Page:  http://lug.boulder.co.us
> > Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> >
> > _______________________________________________
> > Web Page:  http://lug.boulder.co.us
> > Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> >
>
>
>_______________________________________________
>Web Page:  http://lug.boulder.co.us
>Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug





More information about the LUG mailing list