[lug] Digiboard drivers and Linux

[David Willcox]

Has anyone had any experience about Digiboard PC/xe or any knowledge about how to access these intelligent multi-serial boards with Linux. I'm told that the drivers for these boards are located in the kernel and have my kernel settings correct. I could really use some help regarding even a hint of how to set Linux to see these boards. I also know that Linux looks at address 200 but let's say from my older OS using Xenix I had these boards setting selectable from an install disk 5 1/4" .Ancient I know but it worked fine. I even callled Digiboard and they told me to set rc.serial so first port is set at 200 for these 8-port boards. I had no luck after doing all these changes and I have about 10 Pawnshops depending on me to get their boards working with Linux real soon like yesterday. There must be someplace besides /usr/src/linux/include/config or someplace in that area to configure these. How about linuxconf?                                                                                                                    
thanks ahead for any help concerning this,
dave willcox


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lug.boulder.co.us/pipermail/lug/attachments/19991029/93ca3ef3/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Daivd Willcox.vcf
Type: text/x-vcard
Size: 562 bytes
Desc: not available
URL: <http://lists.lug.boulder.co.us/pipermail/lug/attachments/19991029/93ca3ef3/attachment.vcf>