[lug] shutdown -h now

[Mark Horning]

Gary Hodges wrote:
> 
> I recently installed a new motherboard (Tyan S1598).  When I run the
> command "shutdown -h now" I get a severe looking error.  At least it looks
> bad to me.  I hand copied some of it from the screen.  There lots of
> hexidecimal numbers (address locations?) that I didn't copy down, just
> imagine that when you see one below, there were likely several others...
> 
> [<01b752a>]
> code:<1> Unable to handle kernel paging request at virtual address 00008895
> Oops: 0000
> CPU:  0
> EIP: 0010: [<010a12d>]
> Process halt (pid: 9948, process nr: 15, stackpage=c3965000)
> Stack: feeldead [<xxxxxxxxx>]
> CallTrace: [<xxxxxxxxx>]
> Code: 8a 04 0b 89...
> 
> "shutdown -r now" works just fine, so I'm guessing that I have an issue
> with how I have APM configured in the kernel (Power Off on Shutdown)
> only, and they way I have Power Management in the BIOS configured.  I
> tried turning off apmd, but I still get the same error(s).  Other than
> this, everything seems to be working fine.  When I look in the logs, it
> appears that it shut down normally.
> 
> Gary
> 
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug

Have you tried turning off power management in the BIOS?

-- 

Mark Horning
rip6 at home.com