[lug] sig 11 errors with Linux

[George Sexton]

If you have the Enlight case, do you have an additional fan mounted in the
bottom front of the case? By default, they don't come with one there. They
have a little snap off, white plastic cage for holding them.

> -----Original Message-----
> From: lug-admin at lug.boulder.co.us [mailto:lug-admin at lug.boulder.co.us]On
> Behalf Of Gary Hodges
> Sent: Wednesday, June 28, 2000 10:23 PM
> To: lug at lug.boulder.co.us
> Subject: Re: [lug] sig 11 errors with Linux
>
>
>
>
> On Wed, 28 Jun 2000, llornkcor wrote:
>
> > My first thought was maybe the voltage was set wrong on the MB.
> > Is there a heat sink and fan? Was heatsink goo used? Do cables
> > block air passage directly to the CPU? Do you experience sig11's
> > when the cover is off? Perhaps the power supply is wiggin'.,
>
> I've double, and triple checked the core voltage.  It is set for this
> processor.  There is a heat sink and fan(s), all working fine with good
> air flow as far as I can tell, but there is no "goo" between the sink
> and processor as others have inquired about.  No sig 11's with the side
> and front covers off.  I'll have to look into checking the power supply.
>
> Gary
>
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug