[lug] LNE100TX AGAIN

[Hugh Brown]

there's also a netdriver rpm that you might look for on rpmfind

I have been bitten by this issue as well.

Hugh

"Young, Ed" wrote:
> 
> If it's the same card I'm thinking it is, it is supported in the 2.4.x
> series kernels "out of the box". You'll need to recompile a kernel with
> "tulip" support. I compile it into the kernel instead of as a module.
> 
> To run it in the 2.2.x series you need a different tulip driver. The Linux
> driver is shipped with the card on it's driver disks but if you don't have
> those I can get it to ya. Then you just need to swap the file with
> /usr/src/linux/drivers/net/tulip.c and then recompile.
> 
> I've got two machines running those cards and they are fine.
> 
> I'll repost when I get home and can get at the driver.
> 
> Ed
> 
> > -----Original Message-----
> > From: Stephen G. Smith [SMTP:ss2chef at hotmail.com]
> > Sent: Thursday, March 01, 2001 11:06 AM
> > To:   lug at lug.boulder.co.us
> > Subject:      [lug] LNE100TX AGAIN
> >
> > I got a free 10 pack of these Linksys cards and would like to start using
> > them..
> >
> > What does a man have to do to get these cards working?
> > I have tried every trick written to get the modules to load..
> >
> > I am using the latest KRUD on 2 old P 200s and could write a book
> > of all of the error messages under all of the different configurations
> > I have tried?
> >
> > Can anyone help?
> > What do you need ot know?
> > Should I just go back to using my Intel NIC stock?
> >
> > Stephen
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> > _______________________________________________
> > Web Page:  http://lug.boulder.co.us
> > Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug