[lug] HV differential scsi question

[Atkinson, Chip]

Thanks!  I'm pretty sure that the terminator I have is not differential.  I
should have been a bit more clear on that.  Off to order an active
differential scsi terminator...

> -----Original Message-----
> From: John Hernandez [mailto:John.Hernandez at noaa.gov]
> Sent: Thursday, March 15, 2001 5:14 PM
> To: lug at lug.boulder.co.us
> Subject: Re: [lug] HV differential scsi question
> 
> 
> Yes to both, AFAIK, provided that you use a differential 
> terminator.  Of course, active termination will give you a 
> more robust/tolerant bus.
> 
> If you're unsure whether or not your passive terminator is 
> differential, you can determine this using an ohm-meter, as 
> described in http://www.landfield.com/faqs/scsi-faq/part1/
> 
> "Atkinson, Chip" wrote:
> > 
> > Greetings,
> > 
> > Can I use regular scsi cables and a passive terminator in a 
> high voltage
> > differential scsi application?
> > 
> > Thanks,
> > Chip
> > _______________________________________________
> > Web Page:  http://lug.boulder.co.us
> > Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
>