[lug] OpenLinux eDesktop 2.4 and Ultra ATA 100 controller

[Dhruva B. Reddy]

Not the one I tried.  This was on my mother's machine, which I no longer have
access to.

On Mon, Jun 18, 2001 at 04:52:46PM -0600, D. Stimits wrote:
> "Dhruva B. Reddy" wrote:
> > 
> > Someone please correct me if I'm wrong...
> > 
> > Ultra ATA 66 or 100 does not appear to be supported by Linux out of the box
> > (at least with Debian).  Whenever I download the Debian floppy images, I see
> > a directory named "udma66".  I assume this contains drivers for Ultra ATA 66.
> > Does anyone know if these drivers work for Ultra ATA 100?  I have yet to try
> > this.
> 
> I don't know about Debian, but the ATA 100 first appears by default
> somewhere in the 2.4.x kernel series. Does the Debian distro in question
> use a 2.4.x kernel?
> 
> D. Stimits, stimits at idcomm.com
> 
> > 
> > Dhruva
> > 
> > On Mon, Jun 18, 2001 at 01:19:21PM -0600, Applegate,Kris wrote:
> > >
> > > How I was finally able to do it was to use the boot disk I created
> > > during setup. For some odd reason no Linux variant seems to like my Abit
> > > KT7A-RAID motherboard (Promise ATA-100 RAID onboard). I was able to get
> > > it installed just fine, but to actually run it, I have to use the boot
> > > disk. Might wanna give that a shot.
> > >
> > >
> > > --------------------------------------
> > > Kristopher Applegate
> > >
> > >
> > >
> > >
> > > -----Original Message-----
> > > From: Jack Swope [mailto:swopedba at yahoo.com]
> > > Sent: Monday, June 18, 2001 11:23 AM
> > > To: LUG at lug.boulder.co.us
> > > Subject: [lug] OpenLinux eDesktop 2.4 and Ultra ATA 100 controller
> > >
> > >
> > > I have finally suceeded in installing "a" version of
> > > Linux onto my Gateway PC.  The only way I could
> > > accomplish this was to unplug the hard-drive from the
> > > Ultra ATA 100 PCI card and plug it directly into the
> > > MotherBoard Bus.  Now that it is installed I have
> > > tried switching the hard drive back to the Ultra ATA
> > > controller but Linux fails to boot but Windows ME
> > > will.  The boot manager screen appears and asks me if
> > > I want to boot Linux or Windows but will only
> > > successfully load Windows.
> > >
> > > I am very new to the world of Linux but am greatly
> > > interested in learning more.  The machine also refuses
> > > to run RedHat 6.2, 7.0, or 7.0.  In either Ultra ATA
> > > or on the motherboard.
> > >
> > > Jack Swope
> > _______________________________________________
> > Web Page:  http://lug.boulder.co.us
> > Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug