[lug] RH 7.1

[Kirk Ellsworth]

I have ran into the same thing where X flashed.   You need to check how
full your hard drive is.  My case I filled up space in my /root and
needed to clear space.  Once I did all was fine.

-----Original Message-----
From: Chad Wasinger [mailto:cswasinger at qwest.net] 
Sent: Sunday, July 29, 2001 12:07 PM
To: lug at lug.boulder.co.us
Subject: [lug] RH 7.1


I installed RH 7.1 on a compaq presario 3550, during the install
xwindows ran fine and I got the GUI walk through of the install. After
install it boots to Linux and comes up to Linux Login:(not xwindows) but
my video flashes on and off 5 to 10 times and it will not take keyboard
inputs during the flashes, then it stops and I can type for about 5-10
seconds then it starts to flash again. I also got logged in in between
the flashing and ran startx but it fails to start.

Anyone have any idea? Video problem, I have a ATI rage 128 card, I can't
seem to get to a mode where it would be easy to switch drivers.

Thanks in advance for any advise!

_______________________________________________
Web Page:  http://lug.boulder.co.us
Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug