[lug] network boot messages

[Elyse Grasso]

I made sure there were netmasks with the correct values in both of those and 
it didn't stop the problem so I rummaged around and found some garbage 
in/etc/sysconfig/static-routes (probably left from my thrashing with the dns 
problem in my other message.). 

Cleaned out static-routes and my boot messages are clean again.

Thanks

Elyse

On Tuesday 16 October 2001 01:28 pm, you wrote:
> The files of interest are /etc/sysconfig/network and
> /etc/sysconfig/network-scripts/ifcfg-eth*
>
> go look at them and see if anything strikes you as odd.
>
> It looks as if the gateway ip address doesn't fall in the range that is
> created by the ip address and the netmask.
>
> Hugh
>
>
> "Elyse Grasso"
>
> > I have 2 (I think) sets of network problems, which I will put in separate
> > messages. Running KRUD 10/2001.
> >
> > Since last week I have been using two different pcmcia network cards in
> > my laptop: a wireless lan card at work and a 10/100 wired lan card at
> > home. (I know... that sounds backwards.) I also have a 56K modem card
> > that's pcmcia, and in the past week every possible combination of cards
> > have been in the slots at boot time at some point.
> >
> > I have done a lot of thrashing around in the network settings switching
> > back and forth between the two LAN environments: work uses DHCP, home has
> > been using hard-coded settings, but I'm trying to bring up dhcpd on my
> > home server to simpliify matters. Most of the thrashing has been done
> > using linuxconf.
> >
> > I am seeing the following messages at boot (pcmcia has been moved from
> > S45 to S09 to put it before the network stuff, but moving it back makes
> > no difference).
> >
> > Oct 16 12:47:14 xerxes ifup: route: netmask doesn't match route address
> > Oct 16 12:47:14 xerxes ifup: Usage: route [-nNvee] [-FC] [<AF>]
> > List kernel routing tables
> > Oct 16 12:47:14 xerxes ifup:        route [-v] [-FC] {add|del|flush} ...
> > Modify routing table for AF.
> > Oct 16 12:47:14 xerxes ifup:
> > Oct 16 12:47:14 xerxes ifup:        route {-h|--help} [<AF>]
> > Detailed usage syntax for specified AF.
> > Oct 16 12:47:14 xerxes ifup:        route {-V|--version}
> > Display version/author and exit.
> > Oct 16 12:47:14 xerxes ifup:
> > Oct 16 12:47:14 xerxes ifup:         -v, --verbose            be verbose
> > Oct 16 12:47:14 xerxes ifup:         -n, --numeric            dont
> > resolve names
> > Oct 16 12:47:14 xerxes ifup:         -N, --symbolic           resolve
> > hardware names
> > Oct 16 12:47:14 xerxes ifup:         -e, --extend             display
> > other/more information
> > Oct 16 12:47:14 xerxes ifup:         -F, --fib                display
> > Forwarding Information Base (default)
> > Oct 16 12:47:14 xerxes ifup:         -C, --cache              display
> > routing cache instead of FIB
> > Oct 16 12:47:14 xerxes ifup:
> > Oct 16 12:47:14 xerxes ifup:   <AF>=Use '-A <af>' or '--<af>' Default:
> > inet Oct 16 12:47:14 xerxes ifup:   List of possible address families
> > (which support
> > routing):
> > Oct 16 12:47:14 xerxes ifup:     inet (DARPA Internet) inet6 (IPv6) ax25
> > (AMPR AX.25)
> > Oct 16 12:47:14 xerxes ifup:     netrom (AMPR NET/ROM) ipx (Novell IPX)
> > ddp (Appletalk DDP)
> > Oct 16 12:47:14 xerxes ifup:     x25 (CCITT X.25)
> > Oct 16 12:47:14 xerxes ifup: route: netmask doesn't match route address
> > Oct 16 12:47:14 xerxes ifup: Usage: route [-nNvee] [-FC] [<AF>]
> > List kernel routing tables
> > Oct 16 12:47:14 xerxes ifup:        route [-v] [-FC] {add|del|flush} ...
> > Modify routing table for AF.
> > Oct 16 12:47:14 xerxes ifup:
> > Oct 16 12:47:14 xerxes ifup:        route {-h|--help} [<AF>]
> > Detailed usage syntax for specified AF.
> > Oct 16 12:47:14 xerxes ifup:        route {-V|--version}
> > Display version/author and exit.
> > Oct 16 12:47:14 xerxes ifup:
> > Oct 16 12:47:14 xerxes ifup:         -v, --verbose            be verbose
> > Oct 16 12:47:14 xerxes ifup:         -n, --numeric            dont
> > resolve names
> > Oct 16 12:47:14 xerxes ifup:         -N, --symbolic           resolve
> > hardware names
> > Oct 16 12:47:14 xerxes ifup:         -e, --extend             display
> > other/more information
> > Oct 16 12:47:14 xerxes ifup:         -F, --fib                display
> > Forwarding Information Base (default)
> > Oct 16 12:47:14 xerxes ifup:         -C, --cache              display
> > routing cache instead of FIB
> > Oct 16 12:47:14 xerxes ifup:
> > Oct 16 12:47:14 xerxes ifup:   <AF>=Use '-A <af>' or '--<af>' Default:
> > inet Oct 16 12:47:14 xerxes ifup:   List of possible address families
> > (which support
> > routing):
> > Oct 16 12:47:14 xerxes ifup:     inet (DARPA Internet) inet6 (IPv6) ax25
> > (AMPR AX.25)
> > Oct 16 12:47:14 xerxes ifup:     netrom (AMPR NET/ROM) ipx (Novell IPX)
> > ddp (Appletalk DDP)
> > Oct 16 12:47:14 xerxes ifup:     x25 (CCITT X.25)
> > Oct 16 12:47:14 xerxes network: Bringing up interface lo:  succeeded
> >
> > I would appreciate any suggestions about what I might have broken and how
> > to fix it without breaking something else.
> >
> > Thanks
> >
> > Elyse
>
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug