[lug] Serial Line Direct Connection

[Timothy C. Klein]

Hate to reply to my own post, but the baud rates should match, oops.

* Timothy C. Klein (teece at silverklein.net) wrote:
> This is how I do it with my serial consoles:
> 
> On the 'server' I have this in inittab:
> T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
                                     ^^^^
> I then use the following parameters in kermit:
> set line /dev/ttyS0
> set parity none
> set speed 115200
            ^^^^^^
> set serial 8n1
> set carrier-watch off
> 
--
==============================================
== Timothy Klein || teece at silverklein.net   ==
== ---------------------------------------- ==
== "Hello, World" 17 Errors, 31 Warnings... ==
==============================================