[lug] Problem with nStor NexStor 8Le

[Rob Riggs]

The SCSI controller has to be set up to probe all LUNs of the nStor 
device. The actual storage device shows up on a different LUN.

-Rob (Who is amazed that he still can remember this stuff.)

Tony Dyson wrote:

>I'm trying to attach one of these RAID arrays to a test server, but the
>system is apparently not recognizing it as a disk.
>
>>From dmesg:
>
>SCSI subsystem driver Revision: 1.00
>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5
>        <Adaptec aic7890/91 Ultra2 SCSI adapter>
>        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5
>        <Adaptec 2940 Ultra2 SCSI adapter>
>        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>  Vendor: IBM       Model: DRVS09V           Rev: 0140
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>scsi0:A:0:0: Tagged Queuing enabled.  Depth 253
>  Vendor: CHAPTEC   Model: G5312             Rev: 2.0.
>  Type:   Processor                          ANSI SCSI revision: 02
>scsi1:A:0:0: Tagged Queuing enabled.  Depth 253
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
>SCSI device sda: 17928698 512-byte hdwr sectors (9179 MB)
>Partition check:
> sda: sda1 sda2 sda3
>
>---
>
>I've already Googled fruitlessly. Any advice or pointers would be
>greatly appreciated.
>_______________________________________________
>Web Page:  http://lug.boulder.co.us
>Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
>Join us on IRC: lug.boulder.co.us port=6667 channel=#colug
>