[lug] ifconfig errors
Glenn Murray
gmurray at Mines.EDU
Thu May 23 15:58:27 MDT 2002
Hi,
I'm trying to get a CNET Pro 200WL card to work. This is the only
ethernet cared on a new Dell 8200. The biggest chip on the card says
Davicom
DM9102AF
Script started on Thu May 23 09:56:23 2002
puck:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:08:A1:07:D8:49
inet addr:138.67.32.238 Bcast:138.67.63.255 Mask:255.255.192.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:3024 (2.9 KiB)
Interrupt:11 Base address:0xe800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:24 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1992 (1.9 KiB) TX bytes:1992 (1.9 KiB)
puck:~# modprobe -c | grep dmfe
alias eth0 dmfe
puck:~# /etc/init.d/networking stop
Deconfiguring network interfaces: done.
puck:~# rmmod dmfe
puck:~# insmod dmfe
Using /lib/modules/2.2.20/net/dmfe.o
puck:~# /etc/init.d/networking start
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces: done.
puck:~# ping 138.67.1.2
PING 138.67.1.2 (138.67.1.2): 56 data bytes
--- 138.67.1.2 ping statistics ---
474 packets transmitted, 0 packets received, 100% packet loss
puck:~# exit
Script done on Thu May 23 10:18:40 2002
Thanks,
Glenn Murray
http://www.mines.edu/~gmurray
More information about the LUG
mailing list