[lug] network issue/redhat linux 8.0

[Sexton, George]

Please post the following:

boot time dmesg. Boot the system, and then type 

dmesg > dmesg.txt


verbose LSPCI

lspci -vv

/etc/sysconfig/network-scripts/ifcfg-eth0

/etc/conf.modules



-----Original Message-----
From: lug-admin at lug.boulder.co.us [mailto:lug-admin at lug.boulder.co.us]On
Behalf Of r ms
Sent: 05 December, 2002 8:00 AM
To: lug at lug.boulder.co.us
Subject: Re: [lug] network issue/redhat linux 8.0






Well, did that and it comes back and says that it's not configured.
And yet if I do an ifconfig and eth0, it recognizes with irq, base addr,
mac addr, etc. I've checked the doc's and nothing stirkes me yet.

Thx

>From: Tony Dyson <the_anorak at worldnet.att.net>
>Reply-To: lug at lug.boulder.co.us
>To: lug at lug.boulder.co.us
>Subject: Re: [lug] network issue/redhat linux 8.0
>Date: Wed, 04 Dec 2002 23:30:33 -0700
>
>I've seen that new network device control utility do some odd things. Try 
>running "ifup eth0" in a terminal as root. Even if it won't activate the 
>device, it might give you some additional info about the problem.
>
>r ms wrote:
>>
>>I installed Linux Red Hat 8.0. It appears that it recognised my
>>3com card, as when the network utility is brought up, it shows the
>>3com card info, and is associated with device eth0. However, when
>>I try to "activate" the device (a feature of the utility), it
>>responds by saying that it cannot be activated. Any thoughts?
>
>
>_______________________________________________
>Web Page:  http://lug.boulder.co.us
>Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
>Join us on IRC: lug.boulder.co.us port=6667 channel=#colug


_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE* 
http://join.msn.com/?page=features/virus

_______________________________________________
Web Page:  http://lug.boulder.co.us
Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
Join us on IRC: lug.boulder.co.us port=6667 channel=#colug