[lug] Read-only filesystem

[John Hernandez]

Gary Hodges wrote:
> Hugh Brown wrote:
>>
>> On Wed, 3 Jan 2007, Gary Hodges wrote:
>>> [ 2890.878069] sd 6:0:2:0: SCSI error: return code = 0x8000002
>>> [ 2890.878073] sdc: Current: sense key: Aborted Command
>>> [ 2890.878075]     Additional sense: Scsi parity error
>>> [ 2890.878081] end_request: I/O error, dev sdc, sector 156253039
>>> [ 2891.291088] REISERFS: abort (device sdc1): Journal write error in
>>> flush_commit_list
>>> [ 2891.291094] REISERFS: Aborting journal for filesystem on sdc1
>>>

<snip>

>>
>> Yep, you've got a bad drive or a bad controller.  Get the data off the
>> disk if possible.
> 

<snip>

> If I did this correctly, it looks like the drive passed.  Are you sure
> the dmesg output above indicates a failing drive?  I believe the drive
> is under warranty and I can do without it for a week or so I'll probably
>  go ahead and send it in.

It's not necessarily the drive.  As Hugh pointed out, it could be a
problem with the controller.  Or it could be a bad cable or contact
somewhere.  It might be worth doing a little troubleshooting by
eliminating suspect components from the mix.