[lug] Accessing FC5 drive on new FC9 install

[Patrick Mullen]

Hello!

I've searched the archive and I found a thread on this before.  My
apologies, but I have not been able to take that information and then
gain access to my old drive.  I'm missing something so I'm hoping you
can help me out.

The previous thread is here:
http://archive.lug.boulder.co.us/Week-of-Mon-20080602/036631.html

Anyway, both my old (FC5) and new (FC9) drives were part of VolGroup00
but my old drive did not have any LogVol as far as I could tell.  And
I didn't have VolGroup01 as it seems that person had.  So, after much
ado, I eventually removed my old FC5 partition from VolGroup00 and
added it to VolGroup01.  But I'm still unable to access it.

Hopefully, I can just paste this output from /sbin/lvm and you can
piece together the rest so I can finally mount my old data.  /dev/sda
is my new (FC9) drive, /dev/sdb is my old (FC5) drive:

lvm> lvdisplay
  --- Logical volume ---
  LV Name                /dev/VolGroup00/LogVol00
  VG Name                VolGroup00
  LV UUID                HyayjK-Sgsp-y1mu-4SP7-ECfd-ZA7D-w2tMTb
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                277.22 GB
  Current LE             8871
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:0

  --- Logical volume ---
  LV Name                /dev/VolGroup00/LogVol01
  VG Name                VolGroup00
  LV UUID                fiNzLH-s0ax-CgY9-Opna-maFT-vaec-1JlYKZ
  LV Write Access        read/write
  LV Status              available
  # open                 1
  LV Size                1.94 GB
  Current LE             62
  Segments               1
  Allocation             inherit
  Read ahead sectors     auto
  - currently set to     256
  Block device           253:1

lvm> pvdisplay
  --- Physical volume ---
  PV Name               /dev/sdb2
  VG Name               VolGroup01
  PV Size               148.91 GB / not usable 4.15 MB
  Allocatable           yes
  PE Size (KByte)       4096
  Total PE              38120
  Free PE               38120
  Allocated PE          0
  PV UUID               VlPRqf-mNw1-WnOH-2GlM-jJq4-f0Yh-cU0mr9

  --- Physical volume ---
  PV Name               /dev/sda2
  VG Name               VolGroup00
  PV Size               279.20 GB / not usable 10.95 MB
  Allocatable           yes
  PE Size (KByte)       32768
  Total PE              8934
  Free PE               1
  Allocated PE          8933
  PV UUID               1RB3NX-GqD2-Ye5H-JMvy-GT2W-r0XQ-Sl1kOf

lvm> lvscan
  ACTIVE            '/dev/VolGroup00/LogVol00' [277.22 GB] inherit
  ACTIVE            '/dev/VolGroup00/LogVol01' [1.94 GB] inherit
lvm> pvscan
  PV /dev/sdb2   VG VolGroup01   lvm2 [148.91 GB / 148.91 GB free]
  PV /dev/sda2   VG VolGroup00   lvm2 [279.19 GB / 32.00 MB free]
  Total: 2 [428.09 GB] / in use: 2 [428.09 GB] / in no VG: 0 [0   ]




What is the next step(s) I need to access my old drive on /dev/sdb2?


Thanks!

~Patrick