[lug] PCB Layout Software? Gerber RS-274X

[stimits at comcast.net]

Thanks...the scenario is very similar to what you mentioned. I have a vendor demo design (they sell the actual completed board as well) which is not quite what I need, and so I need to modify this. I guess I need to start looking for schematic capture instead of gerber reading.
.
----- Original Message -----From: Stephen Queen <svqueen at gmail.com>To: Boulder (Colorado) Linux Users Group -- General Mailing List <lug at lug.boulder.co.us>Sent: Wed, 25 Jun 2014 20:20:42 -0000 (UTC)Subject: Re: [lug] PCB Layout Software? Gerber RS-274X



A gerber file is simply a plot file for a laser plotter. Trying to reverse the plot file to an editable file used by a pcb layout program would be very difficult. Electrical and design rules would be impossible to check on such a reverse plot. When a circuit designer builds a printed circuit board, they usually start by doing the schematic, then running the electrical checks on it. The second step is doing the layout. When the layout is complete, then the design rules are checked (spacing, clearances, etc). The final step is generating the gerber files. The file extensions are fairly arbitrary, and are different from one design package to another. 


Your best bet would be to try and create a schematic, then the layout could be manually copied by looking at the gerbers, and trying to duplicate them. I have done this using the drawings provided by demo designs from vendors trying to sell their chip sets. There they provided a schematic that I simply copied into my schematic capture program.


I have seen commercial gerber editors, but even they were clunky, and could only be used for the simplest of edits. They use to require you to purchase the complete package to get the editor though.

Good Luck. 


On Wed, Jun 25, 2014 at 1:54 PM, <stimits at comcast.net> wrote:

This particular application looks like it has what I need, but fails to import any of the existing gerber files and does not show any errors to indicate what the problem is.


----- Original Message -----From: Orion Poplawski <orion at cora.nwra.com>To: Boulder (Colorado) Linux Users Group -- General Mailing List <lug at lug.boulder.co.us>
Sent: Tue, 24 Jun 2014 21:38:52 -0000 (UTC)Subject: Re: [lug] PCB Layout Software? Gerber RS-274X




On 06/24/2014 01:56 PM, stimits at comcast.net wrote:> I need to open some circuit board designs in linux, and although there seem to> be design programs out there I'm having problems finding one that reads the

> particular files I have. The files are listed as RS-274X format, and have> these extensions on file names:> *.drl> *.pho> *.lst> *.ppm> *.rep> Does anyone here know of or have a favorite PC board program that can directly

> import or use these? I'm using fedora if that helps.> Thanks!

# yum info pcbLoaded plugins: auto-update-debuginfo, langpacks, tmprepoAvailable PackagesName : pcbArch : x86_64Version : 0.20110918Release : 12.fc20Size : 1.3 MRepo : fedora/20/x86_64

Summary : An interactive printed circuit board editorURL : http://pcb.sourceforge.netLicense : GPLv2Description : PCB is an interactive printed circuit board editor.

: PCB includes a rats nest feature, design rule checking, and can provide : industry standard RS-274-X (Gerber), NC drill, and centroid data (X-Y data) : output for use in the board fabrication and assembly process. 

PCB offers : high end features such as an autorouter and trace optimizer which can : tremendously reduce layout time.

?

-- Orion PoplawskiTechnical Manager 303-415-9701 x222NWRA, Boulder/CoRA Office FAX: 303-415-9702

3380 Mitchell Lane orion at nwra.comBoulder, CO 80301 http://www.nwra.com_______________________________________________

Web Page: http://lug.boulder.co.usMailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug

Join us on IRC: irc.hackingsociety.org port=6667 channel=#hackingsociety



_______________________________________________

Web Page:  http://lug.boulder.co.us

Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug

Join us on IRC: irc.hackingsociety.org port=6667 channel=#hackingsociety



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lug.boulder.co.us/pipermail/lug/attachments/20140625/97201144/attachment.html>