[lug] NTP Configuration

[SoloCDM]

Attached are the configurations I placed in the server's /etc/ntp.conf
file.  I have reject on my ppp0 device for the ntp port (both tcp and
udp).  (Note: Even without the ipchains reject rule . . . it doesn't
work.)  I executed ntpdate and I get the following:

13 Sep 14:01:28 ntpdate[598]: no servers can be used, exiting


Where did I go wrong?

Are there better peers to use for ntp in Colorado?

--
Note: When you reply to this message, please include the mailing
      list/newsgroup address and my email address in To:.

*********************************************************************
Signed,
SoloCDM
-------------- next part --------------

#
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available. The
# default stratum is usually 3, but in this case we elect to use stratum
# 0. Since the server line does not have the prefer keyword, this driver
# is never used for synchronization, unless no other other
# synchronization source is available. In case the local host is
# controlled by some external source, such as an external oscillator or
# another protocol, the prefer keyword would cause the local host to
# disregard all other synchronization sources, unless the kernel
# modifications are in use and declare an unsynchronized condition.
#
server navobs1.usnogps.navy.mil
server navobs2.usnogps.navy.mil

server	127.127.1.0	# local clock
fudge	127.127.1.0 stratum 10	

#
# Drift file.  Put this in a directory which the daemon can write to.
# No symbolic links allowed, either, since the daemon updates the file
# by creating a temporary in the same directory and then rename()'ing
# it to the file.
#
driftfile /etc/ntp/drift
multicastclient			# listen on default 224.0.1.1
broadcastdelay	0.008

#
# Authentication delay.  If you use, or plan to use someday, the
# authentication facility you should make the programs in the auth_stuff
# directory and figure out what this number should be on your machine.
#
authenticate no

#
# Keys file.  If you want to diddle your server at run time, make a
# keys file (mode 600 for sure) and define the key number to be
# used for making requests.
# PLEASE DO NOT USE THE DEFAULT VALUES HERE. Pick your own, or remote
# systems might be able to reset your clock at will.
#
#keys		/etc/ntp/keys
#trustedkey	65535
#requestkey	65535
#controlkey	65535

restrict default ignore