[lug] eth0 and 6.1

[Jef Vratny]

Just out of curiosity does it matter if it's an ISA instead of a PCI card?


> -----Original Message-----
> From: lug-admin at lug.boulder.co.us [mailto:lug-admin at lug.boulder.co.us]On
> Behalf Of Mike Loseke
> Sent: Thursday, January 06, 2000 3:20 PM
> To: lug at lug.boulder.co.us
> Subject: Re: [lug] eth0 and 6.1
> 
> 
> Thus spake Jef Vratny:
> > 
> > I've got it set up with a static IP and th NIC is a 3COM Etherlink III
> 
>  Is it one of those combo cards? You might have to use the 3com 
> diskette to
> force it to use the twisted pair port (assuming that's what you want)
> instead of the AUI or other connector.
> 
> 
> > jef
> > 
> > > -----Original Message-----
> > > From: lug-admin at lug.boulder.co.us 
[mailto:lug-admin at lug.boulder.co.us]On
> > Behalf Of Calvin Dodge
> > Sent: Thursday, January 06, 2000 12:20 PM
> > To: lug at lug.boulder.co.us
> > Subject: Re: [lug] eth0 and 6.1
> > 
> > 
> > Jef Vratny wrote:
> > > 
> > > older Compaq Prolinea 5150. I got everything installed (I'm 
> > pretty sure) and
> > > running okay, but can't seem to bring up the eth0 connection. 
> > Never had any
> > 
> > Two questions:
> > 
> > 1) What type of NIC are you using?
> > 2) Are you using DHCP, or did you give it a static address?
> > 
> > Calvin


-- 
   Mike Loseke    | One of life's best joys is putting the little 
 mike at verinet.com | rubber feet on a new piece of networking gear.

_______________________________________________
Web Page:  http://lug.boulder.co.us
Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug