[lug] Fedora core 6 and Promise UltraTrak RM8000

[Steve A Hart]

It's not a termination problem.  All three RAIDs are chained together 
with the DS570 as the last one on the chain and it is terminated 
properly.  The DS570 mounts and has no problems at all so it's not the 
cables, termination, or SCSI ID's.  Each one has it's own individual ID.

Any other thoughts?



D. Stimits wrote:
> ...
>>
>> Any idea would be GREATLY appreciated!
> I've seen similar problems with bad termination. Are each of the 
> arrays on their own channel? If so, each needs termination, often a 
> built in feature of array hardware (enabled with a jumper). If they 
> share a channel, only 1 will be terminated. I've also seen similar 
> problems when a cable was not seated fully.
>
> D. Stimits, stimits AT comcast DOT net
> _______________________________________________
> Web Page:  http://lug.boulder.co.us
> Mailing List: http://lists.lug.boulder.co.us/mailman/listinfo/lug
> Join us on IRC: lug.boulder.co.us port=6667 channel=#colug